TRILOGY NETWORX AL-IM3-POE Generation 3 POE Gateway

The Trilogy Networx AL-IM3-POE is a Gateway device used within the Trilogy Networx™ wireless system. Combines with wireless wall-mounted expanders and plug-in wireless expanders to cover more building space with a single IP address. Installation is simple, only requiring access to one RJ-45 Ethernet network cable for both communication and power.

NOTE

• Generation 3 Gateways are compatible with DL-WINDOWS version 5.5.4 and later only
• Generation 3 Gateways can be mixed into an existing system that includes older “non-version 3” gateways

Features

• Network gateway for Networx lock systems
• Power-over-Ethernet (POE) gateway – no power supply or adapter needed
• Expand your Networx lock system with up to 7 Expanders (AL-IME2-EXP) – Note expanders cannot communicate with older Gen 1 Gateways
• Mount within 175 feet* (radially) from the intended wireless lock location(s)
• Expanders should be mounted in elevated areas** – recommended mounting position 6 to 12 in. below standard 8-9 foot ceiling
• Cost-effective and easier to wire than conventional gateways
• Networx system automatically identifies all newly powered Expanders and quickly self-determines the best wireless signal pathways
• Each Gen. 3 Gateway and a maximum of seven (7) Expanders can be addressed as one group
• Total of 99 addressable groups supported (addressable by two rotary switches)

*Open areas increase range while concrete building construction, walls, ceilings and narrow corridors decrease range
**Drop ceiling installation not recommend, signal strength may be affected

NEW for Generation 3

• Optional hardwired switch that connects directly to the gateway to initiate global lockdown