TownSteel TDC 70, ALUMINUM, GRADE 1

TDC 70 Door Closer is ANSI/BHMA certified heavy-duty Grade 1 with aluminum body, and UL 10C 3-hour rated.

SPECIFICATIONS

Application
For heavy traffic areas, exterior or interior
Body
Heavy duty aluminum body, non handed
Rack and Pinion
Precision rack and pinion construction, 7/16" diameter pinion
Arm
Regular arm standard, Friction Hold-Open, Cush, Hold-Open and Cush arm, and slide track arm optional
Installation
Tri-Style installation, includes hardware and brackets to allow for regular, top jam, and parallel arm installation
Spring Power
Adjustable spring power from size 2 to size 6 (TDC-70), and size 1 to size 4 (TDC-70BF), factory preset size 3
Latch Valve
Adjustable standard
Sweep Valve
Adjustable standard
Back Check Valve
Adjustable standard
Delayed Action Valve
Adjustable, available on TDC-70BF
Cover
UL listed molded plastic full cover standard, 2-1/2" projection, metal cover optional
Fluid
All-weather fluid, allowing door closer to perform in temperatures ranging from -31°F to 140°F
Needle Bearing
The standard for higher efficiency
Piston
1-1/2" (38mm) diameter
Maximum Door Opening
Regular arm 180°? Parallel arm 180°? Top jamb 180°
Finish
Aluminum (AL) and Duro (DU) stock finishes, other upon request
Warranty
25 years of limited



CODE COMPLIANCE

ANSI/BHMA
A156.4 Grade 1 Certified
UL
UL &ULC Listed
BAA
BAA model meets guidelines of the Buy American Act
ADA
TDC-70BF adjustable to meet requirements of the Americans with Disabilities Act

Arms

? Friction Hold Open Arm
? Cush Arm
? Hold-Open and Cush Arm
? Slide Track Arm


Drop Plates

? TDC-70-DPPA: For push side parallel arm installation when mounting surface height is less than 4-3/4"
? TDC-70-DP: For pull side mounting when mounting surface height is less than 3-1/2"