SECO-LARM Post-Mount No-Touch Sensor with Access Box, Adjustable Delay Timer & Override Button SD-9963-KSGQ

The ENFORCER Post-Mount No Touch Sensor with Access Box is a full-featured exit plate that uses IR technology to allow egress from a protected area or activate a device with the simple wave of a hand.

• Adjustable sensor range up to 7" (18cm)


• Weather resistant for outdoor use


• Stainless-steel face-plate


• Hinged plate easily removes from the box for easy wiring


• Adjustable trigger duration 0.8~30 seconds or toggle (ON/OFF)


• Form C relay rated 1A@30VDC


• 12~24VDC


• Gooseneck- or wall-mountable


• Manual override button


• LED-illuminated sensor area for easy identification


• Selectable LED colors (turns from red to green or green to red) on sensor activation


• Includes heavy-duty steel box




• 
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  

  Operating Voltage	12~24 VDC
  Current Draw	Standby- 16mA@12VDC / 25mA@24VDC, Triggered- 25mA@12VDC / 32mA@24VDC
  Relay Type	Form C dry contact, 1A@30VDC
  Response Time	10ms
  LEDs - Standby	Red
  LEDs - Triggered	Green
  Output Time	0.8~30 s or toggle
  Range	2"~7" (5~18 cm)
  IP Rating	IP65 (Front panel only)
  Operating Temperature	-4º~131º F (-20º~55º C)
  Weight	1-lb 9-oz (710g)
  Dimensions	4" x 5-1/2" x 3" (102 x 134 x 77 mm)