Seco-Larm

Electric Door Strike w/ RF Receiver & RF Wireless Transmitter w/ Plug-in Transformer - Fail-safe / Fail-secure - 12VDC - UL Listed

Can fit any door with optional latch.

• Seco-Larm - Electric Door Strike - Metal Doors - Fail-safe / Fail-secure - 12VDC - UL Listed
• Seco-Larm - 2-Channel RF Receiver - 11~24 VAC/DC - 315MHz - Two Relays
• Seco-Larm - 315MHz Pendant RF Transmitter with 2 Button - 3 Channel - Pre-coded.
• Seco-Larm - 12VDC Plug-in Transformer

The SECO-LARM® Electric Door Strike can be used to convert cylindrical lock sets into an electronic access controlled locking system. Combine with an optional SECO-LARM® digital keypad for keyless high security.

• UL 294 & UL 1034 Listed
• Can be used with virtually any cylindrical door locking system
• Can use with an optional digital keypad
• Suitable for office-type applications
• Reversible non-handed design fits either right hand or left-handed doors
• Shallow design for use with most metal doors
• Powered by a solenoid, not a buzzer coil
• Static strength – 1,000 lbs. (454kg)
• Stainless steel keeper for strength and long life
• Non-polarized connection
• Tested to 250,000 cycles (UL Tested)
• Fail-secure or Fail-safe
• 280mA
• Dimensions: 4-7/8"x1-1/4"x1-1/4" (124x32x32 mm)
• Operating Temperature: 14°F~113°F (-10°~45° C)
• Dynamic strength: 50-ft-lbs. (6.91 m-kgs)
• Static Strength: 1,000 lbs. (454kg)

Seco-Larm - 2-Channel RF Receiver - 11~24 VAC/DC - 315MHz - Two Relays:

• 5 Programmable output modes:
• 4-Second momentary, toggle, latch, validity (receiver outputs for as long as the transmitter button is pressed), 1-second momentary
• New! 2 Independently programmable channels
• Compatible with all 315MHz ENFORCER transmitters
• Use to control garage door opener, house lights, alarm control panel, or other devices via remote control
• Two Form C dry relay contact (NO/NC/COM) outputs. Rated 10A@24VDC
• Frequency 315MHz. 433MHz
• This revolutionary receiver incorporates:
• --1. Hi-Q SELECTIVITY and a CODING IC for rejecting unwanted RF signals.
• --2.HIGHER SENSITIVITY for greater operating distances.
• --3.UNSURPASSED ANTENNA MATCHING CAPABILITIES so the receiver is less affected by how and where mounted.
• --4.GREATER TUNING STABILITY so the receiver's frequency remains unaffected by shock and vibration
• 2 LEDs (one for each channel) indicate RF reception, learn mode entered, transmitter learned, memory cleared
• 2 Mode switches (one for each channel) for easy transmitter learning
• Learns up to 30 transmitters (15 for each receiver channel)
• Screw terminals for simple connection
• Accepts ENFORCER fixed code or CODEBUMP transmitters

Seco-Larm - 315MHz Pendant RF Transmitter with 2 Button - 3 Channel - Pre-coded.

• Over 68 billion possible codes
• LED transmission indicator only appears when buttons are pressed
• Operates up to 500ft (150m)*
• RF Anti-scan protection
• FCC and IC Certified
• 315MHz (433.92MHz available)
• Compatible with all 315MHz SECO-LARM receivers
• Slimline design: 1-1/4"x2-3/16"x5/16" (31.5x55x8 mm)
• Replacement batteries available: X-930-096 (CR2032)
• Patented design
• *Actual range will vary greatly depending on the installation and operating environment

Seco-Larm - 12VDC Plug-in Transformer - 2 AMPS

This is a 12VDC Plug-in Transformer running at 2 Amps. Made by Seco-Larm. With its variety of uses in both commercial and residential security, this transformer has proven itself time and time again.

Features:

• Use in a wide variety of applications including CCTV, access control, and security
• Sideways plug for easy use with power strips
• Universal 100-240 VAC input. Regulated 12VDC output
• 4ft (1.2m) cord, 2.1mm plug (positive center)
• Low power consumption