TOUCHLESS ENTRY KIT WITH ADA COMPLIANCE BY SDC

This bundle includes (1) SDC AUTO EntryControl Low Energy Swing Automatic Door Operator, (2) SDC 474U Touchless Wave-to-Exit Switches, (1) CBC482A4U Bollard with CBC Compliant ADA Push Plates (1) 482A2U Wall-Mounted ADA Push Plate (1) 400W1-433 Transmitter and 400RC433 Receiver for ADA Push Plate and

SDC AUTO EntryControl Low Energy Swing Door Operator

• Plug N Play Access Control System Installation

• Easy Installation

• Single Button, Self-Tuning Setup

• Momentary Pull

• Power-Close Option

• ADA Compliant handicap and automatic door opener

• Complies with ANSI A 156.19

• UL – Certified for use as fire door operators (3 hour rating)

• Self-Tuning, Self-Learning

• Minimum 5 seconds from close to open

• Stays open for 5 seconds

• Force: 15 lbs -6.8 kg

• Push or Pull (In door, Out swing)

• Activation: Knowing Act via Card Reader/Keypad, or REX switch

• Optional Safety Device, Auto-IR Presence Sensor and Door Re-Activator

• Power: 1A, 100W

• Aluminum color, dark bronze may be special ordered POA

• Extremely Quiet Operation

SDC 474U Touchless Wave-to-Exit Switch

• Uses IR Sensor technology; device is active with the simple wave of a hand

• Designed to control electric locks/strikes, magnetic locks, or automatic door operators

• Ideal for use in sanitary applications such as cleanrooms, bathrooms, food processing, hospitals and labs

• Sensing Range up to 4 in. (10cm)

• Mounted on a durable stainless steel plate

• Dual LED, illuminated sensor, Red/Green indicates Inactive/Active status

• Quick connect screw-less terminal block for easy installation

Specifications

• Input: 25mA (standby); 55mA (Active) @ 12/24VDC

• Output: 2-SPDT, 3 Amp Dry Contact

• Activation Time: 1 second or as long as sensor is triggered

• LED Color: Standby RED; Active Green

• Range: 4 in. (10cm)

• Weight: 3 oz. (85g)

• Dimensions: 4.5 in. x 2.75 in. x 1.375 in. (115 x 70 x 35mm)

Bollard Post with CBC Compliant ADA Push Plates

• CBC Section 11B 404.3 code compliant bollard and switch plates

• Black HDPE mortised removable cap with secure transmitter mount (wireless transmitter optional and sold separate)

• Two 4-1/2 in. “Push to Open” blue infill push plates, located at 7 in. and 36 in. centerline from floor

• 6 in. square post with 1/8 in. walls

• Surface mount (42 in.)

400W1-433 433MHz Micro Transmitter

• Requires a Non-Metallic Surface Box or Standard Bollard Cap (non-metallic)

• Pre-Wired for Quick Installation

• Antenna Magnifies Signal

• Works with 400RC433

400RC433 433MHz One Channel Receiver

• Designed to Control Automatic Closing and Anti-Burgular Systems

• Works with 400W1-433

482A2U Wall-Mounted ADA Push Plate

• Pressing Any Part of the Push Plate (2 3/4 in. x 4 1/2 in.) Causes Switch Actuation

• Recessed Surface Box or Bollard Mount

• Depth: SPDT – 7/8 in. Deep; DPDT – 1-3/8 in. Deep

• Weight 0.6 lbs