Sidebar
Norton Door Operators 6000 Operator 6031 689 Single Door, Standard Duty To 180 Degree, Double Lever Arm, Push Side
$4,867.11
- Brand
- Norton
- SKU:
- 6031-689
- Condition:
- New
Norton 6000 Model 6031-689 Push Side
- Electrohydraulic units are used in applications where doors are typically operated manually but can also be activated via wall switches, motion sensors, etc. for automatic operation.
- Push and Go selector, as the door is manually opened, the operator "senses"movement and opens door to the full-open position.
- Operates as mechanical surface closer during close cycles or if power is turned off.
- Infinite Hold Open - Door will hold open at set position until power is turned off.
- Onboard power supply to handle multiple system peripherals.
- 24VDC @ 1.3A output for connection of electric strike, lock.
- Obstruction Detection - Motor stops if door is obstructed during opening or closing.
- Push and Go feature - as the door is manually opened, the operator "senses" movement and opens door to the full-open position.
- Unit activation options: wall switches, motion sensors or radio frequency devices
- Modular construction for easy, one person installation.
- Single pole double throw (SPDT) relay output
- Vestibule delay adjustment
Style | Powermatic Low Energy Door Operator |
---|---|
Mounting | Push Side (stop side) |
Door Handing | Non-handed |
Power Input | 120VAC, 60 Hz |
Reveal | 2-3/4" to 6-7/8" |
Door Opening | Maximum 110° (can be opened manually to 180°) |
Suited For:
- Interior and exterior doors with moderate to high traffic
TQuality and Safety:
- ANSI/BHMA A156.19 certified.
- ETL tested to UL/ULc standards for automatic doors used on fire and smoke barrier doors.
- Meets requirements for Americans with Disabilities Act (ADA)
- Meets requirements for UL10C for positive pressure
- 2 year limited warranty
- ELECTRICAL DATA
Power input 120 VAC, 60 Hz (+10%, -15%)
Current draw 0.9A (single), 1.8A (double)
Auxiliary output 24 VDC @ 1.3A
SPDT relay output for controlling electric strikes or electric locks not to exceed 1 amp @ 30 VDC - ANSI/BHMA A156.19 certified
ETL tested to UL / cUL standards for automatic doors used on fire and smoke barrier doors and CSA C22.2
No. 247 for operators and systems of doors
UL10C listed for positive pressure fire test
Comply with requirements for the Americans with Disabilities Act (A.D.A)
California State Fire Marshall Listing 3266-0944:0110