COMPX SS-MSKP-CAB STAND-ALONE MAGSTRIPE CARD CABINET ELOCK W/ KEYPAD

Do-it-yourself, effortless installation can be done in as little as 12 minutes. Meets Joint Commission Requirements.

• Industrial strength stand-alone magstripe/keypad cabinet lock with new membrane 10-button operator panel


• Program manually on user friendly LCD blue backlit screen or through LockView software


• Select 4 to 14 digit user codes; Dual credential capability with Lockview software


• EASY surface mounted installation. Can be screwed in, or most common mount is using adhesive strips. (strips included with order) Once on with adhesive strips, will not come off easily. You would have to use piano wire to break through each of the bond points


• Each eLock unit includes exterior numeric keypad, inside motorized latch, battery compartment, latch cable, and detailed installation instructions


• Supports 3000 User / Supervisor PIN codes – add/delete users/supervisors quickly at the unit, or with optional LockView software (available at checkout)


• Audit trail of last 15,000 access attempts with date, time and user name via USB connection (requires LockView Software)


• Enhanced Security; two reset codes required to delete users and supervisors


• Powered by 6AA alkaline batteries (not included). Under normal daily use, you can expect to get appx. one year’s worth of use from a set of 6AA’s


• Low Battery Indicator; visual


• Jump-Start Feature; allows authorized user to press a 9-Volt battery into the power port to access the eLock when batteries are fully exhausted


• Non-Volatile Memory; should batteries run out, lock data and programming is preserved


• eLock is compatible with 12V electric door strikes