CL2200 Electronic Surface Deadbolt

The CL2200 is a medium duty electronic lock. The bolt slides on the inside surface of the door to lock or unlock.
The bolt is moved manually by means of the outside knob after the code is entered, and freely by the inside knob at all times.
When a valid code is entered and the blue LED lights burn, the knob will retract the bolt. The key will open the door for management functions. Code Free Mode can be programmed at the keypad using the Master Code.

• Surface deadbolt


• Rapid retrofit for basic single code mechanical locks


• On door programming via Master Code in seconds


• Allows up to 80 User Codes


• Allows up to 10 One-Time User Codes


• Over 80,000 operations from 2 x AA cells (supplied)


• Non-handed


• PVD low maintence finish


• Key override as standard

The lock can store up to 80 different User Codes. Codes may be 4, 5or 6 digits long. Programming is via the keypad, using the Master Code.The lock has fitted as standard two alarm release terminals:

• REM1 is used to open the lock from a reception desk button or answer phone


• REM2 can be linked to an alarm system which, when activated by a momentary contact, will release the door for 30 minutes. This allows emergency personnel to enter the room to rapidly check that no one has been trapped and overlooked

Brand: Codelocks
Body Material: Zinc Alloy
Buttons: Individual, stainless steel
Code free option: Yes
Door thickness: 35mm - 60mm (1 3/8" - 2 3/8")
Finish: Brushed steel, polished brass
Keying alike: Locks can be supplied as keyed alike on request
Key override: Yes
Non handed: Lock will fit doors hung on the left or right
Power: 2 x 1.5v AA cells
Spindle type: Flat bar spindle & 8mm square adaptor
Suitable for: Internal use
Type: Surface deadbolt
Operations: 80,000