Specifications • Size: 1-1/4" W x 3-5/8" L x 3" x 1-7/8" D Features • Works with the following models: RP-1 RP-3 RP-24 RP-25 • Galvanized cold rolled steel box • Securely fastens narrow remote plate to hollow walls
Models 426 Recessed Backbox for RP-1 and RP-3 Remote Plates
FeaturesPlate labeled "EMERGENCY DOOR RELEASE ALARM WILL SOUND5/8" x 7/8" red, rectangular push buttonSwitch mounted on either narrow or single gang plateSwitch illuminated with hi-brightness...
Narrow satin stainless steel plate with 3/4" "D" hole for Medeco lockAluminum back plate with normally-open tamper switch, contacts rated .75A @ 125 voltsAvailable in all standard finishes Models...
Specifications • Normally-closed tamper switch • 1/4" red and green LEDs that operate on 12 or 24 VDC • Current draw: 8 mA at 12 VDC, 12 mA at 24 VDC • Narrow 1-1/2" satin stainless steel wall plate...
the timer will activate when "PUSH TO EXIT" switch is depressed. Subsequent depressions of the switch will re-start the timer.5/8" x 7/8" green rectangular push buttonLabeled "PUSH TO EXIT"Switch...
PIEZO BUZZER MOUNTS ON 1.75 INCH STAINLESS STEEL WALLPLATE OPERATING VOLTAGE RANGE 6 TO 28 VOLTS DC MINIMUM SOUND LEVEL 80 Db @ 3 FEET CURRENT DRAW 3 MA @ 6 VDC, 18 MA @ 28 VDC 6 INCH RED AND BLACK...
Pneumatic Time Delay Request to Exit Station Specifications • Switch mounted on narrow 1-3/4" wall plate • Two sets of contacts, one N/O, one N/C, isolated • Contacts rated 10A at 120 VDC • Switch...
FeaturesPlate labeled "EMERGENCY DOOR RELEASE ALARM WILL SOUND5/8" x 7/8" red, rectangular push buttonSwitch mounted on either narrow or single gang plateSwitch illuminated with hi-brightness...
Specifications • 1/4" red and green LEDs operates on 12 or 24 VDC • LED current draw 8 mA at 12 VDC, 12 mA at 24 VDC Features • Single gang stainless steel wall plate with 1/4" red and green LEDs •...
